Anti-Static Finish

Size: 1 Gallon Bottle

Anti static final wipe on bare plastic, eliminating dust. Problem solver. SSP-6000 creates practically dust-free bumper that needs minimal to no polish. Steps for painting raw plastic bumpers. Clean bumper with ssp6000 antistatic prep clean. Spray 2 wet coats of pp-100Q adhesion promoter (flash time immediate) Spray your top coat. If your bumper is repaired or primer bumper use the above steps after you are done with final sanding. For an optimum finish, we highly recommend SSP8000 clear coat, guaranteed to be better than any higher end clear coat such as BASF, PPG or DuPont. This almost eliminates all static on bare plastic bumper and other plastic components of a vehicle. This is another problem solver. Most painters prep clean new plastic bumpers, shoot adhesion promoter, base and clear. *During the first adhesion process, lint comes back to the surface even after air blowing, causing specs and dust in under and in between paint. Most painters will stop and sand and rebase, resulting in lost time, material, and additional spray booth time that is surely costly. SSP6000 Eliminates that problem, creating a practically dust free bumper that needs minimal to no polish, obviously depending on the painter. The problem is out there; this is the solution. This product should be sprayed on, use a small spray bottle for application of SSP6000.