Impact Resistant Hardener

Size: 1 Gallon Can

SSP11000 protective clear is a tow part component used only with 11000b hardener. Impact Resistant Coating is resilient and durable clear coating designed to repel stones and other road debris that could damage the finish of your vehicle. Impact Resistant Coating is a unique clear coating that protects finishes from rocks stones, gravel and various other road debris. It serves the same purpose as plastic film protecting. It can be applied with normal spray equipment. Application is similar to other automotive clear coats. When applied properly the cured Impact Resistant coating repels flying rocks and stones. It is highly chemical resistant and is not affected by gasoline or most other automotive chemicals. The cured film is crystal clear allowing the beauty of the finish to show through. It can be applied over any cured automotive finish as well as directly over base coat in place of regular clear coat. The resulting finish is a resilient tough coating that protects the beauty of your vehicle. The extra-enhanced property of this coating is the self-healing characteristic of the coating after being targeted by gravel. The scratches will diminish in time. Mixing Directions: Mix 1 part Impact Resistant Coating component SSP11000 with 1 part Impact Resistant Coating component SSP11000b. Mix thoroughly before applying. It is imperative that equal parts of Impact Resistant Coating are measured out.

The Impact Resistant Polyurethane Clear Can Not be buffed, as is. If buffing is desired the product should be slightly sanded with 600 to 800 grit sand paper and a coating of SSP8000 should be applied to the parts and cured at ambient temperature for 4-6 hours, or oven cured at a temperature of 120-140 F” and buffed according. The highly cosmetic SSP8000 is a two-component polyurethane clear with exceptional weathering capacities and highly cosmetic sheen. All characteristics of Impact Resist Product is totally preserved, and at the same time the buffing is enhanced. The required film thickness is 1.5 – 2 mils dried. Can also be used as bed-liner.